A newly-developed compound with polymers which have a higher molecular weight and an increased volume of silica has now been developed. The increased silica provides excellent wet grip while maintaining a good level of rolling resistance, which reduces your fuel costs. The long polymers are intertwined with one another, thus increasing the strength of the rubber and thereby giving excellent handling performance as well as great mileage.
Enhanced Full Logic Tread Pattern
Enhanced Full Logic Tread Pattern The C.drive’s ‘Full Logic’ asymmetrical tread pattern has now been enhanced even further. The positioning of the grooves provides superior performance on both wet and dry road surfaces. The minimized groove area in the outer zone and the shortened lug grooves on the inside shoulder are designed to maintain rigidity when cornering, whilst the four wide straight grooves and the spiral drain grooves on the centre ribs are effective in draining water. Diamond-shaped bevels (3) ease the stress on the central rib, which prevents uneven wear.
EU Tyre Label and Efficiency Classes
The European Union has introduced the EU Tyre Label by Regulation (No. 1222/2009) identically and bindingly for all EU member states. It applies to passenger car tyres, light commercial vehicle tyres and heavy commercial vehicle tyres produced after 01.07.2012.
Three different areas are tested: rolling resistance, wet grip and the rolling noise the tyre makes on the road.
The following are not affected by the EU Tyre Label: retreaded tyres, professional off-road tyres, racing tyres, tyres with additional devices to improve traction such as spiked tyres, T-type emergency tyres, special tyres for fitting to vehicles first registered before 1 October 1990, tyres with a maximum authorised speed of 80 km/h, tyres for rims with a nominal diameter of 254 mm or less or 635 mm or more.
With this regulation, the European Union is pursuing the goal of promoting economic and ecological efficiency in road traffic as well as increasing road safety on the one hand, and on the other hand, granting consumers more product transparency and at the same time serving as an active decision-making aid.
Already during the incorporation, experts criticise the fact that the EU Tyre Label unfortunately only shows a few product characteristics. Apart from rolling resistance, wet grip and rolling noise, which are the main focus of EU tyre labelling, tyres have much more important and safety-relevant product characteristics, such as aquaplaning properties, driving stability, service life, braking properties on dry and wet roads, behaviour in wintry conditions, etc.
Tyre manufacturers point out that test results from various institutions and journals remain an important information medium for the end consumer. These tests usually focus on further safety-relevant product characteristics besides the EU standard qualifications for tyre labelling, which are always important for the final customer.
*Prices include VAT and delivery within mainland UK (excl. Scottish Highlands).
**More than 90% of our orders reach the customer in the specified delivery time.